Broken or defective kitchen taps could be annoying. Especially when it gets to the point water can’t flow from the tap due to a defect. The question is do you need the service of a pro plumber to change a kitchen tap?
No is the answer.
Gladly, how to change a kitchen tap is one of the plumbing services you can do yourself, once you have the guide.
To guide you on the right part, we have compiled the right information on how to change a kitchen tap in this article.
So, let’s dig deep into all your need to know about replacing kitchen tap DIY.
How to change a kitchen tap
The first step is to have the tools handy. Having the right tools will make replacing the kitchen tap so easy. So, what is the right tool? Below are the tools you need:
- Open-ended spanners
- Basin wrench
- Back nut box spanner
- Adjustable pliers
- Cleaning cloth
- PTFE tape
- Washing bowl
- Towel
- Adjustable wrench
- Slotted screwdriver
- Pipe cutter
- vBox spanner or ratchet
- Compression fittings or check valves
- Hacksaw or olive splitter
- Limescale remover
- Masking tape
- Pen
- Joining compound
The list of the tools looks overwhelming but that should not disturb you. They are very affordable and you can get them at nearby plumbing shops around you.
Now, let’s go to the step-by-step guide.
Step 1. Turn off the Water Supply
You must completely cut the water supply to the kitchen or to the pipe that leads to the tap. To do that, you have to lock the outside control valve or independent isolation valve.
If the system does not have an outside control valve, then you turn off the water supply from the main source.
You can move to the next step if the water supply is 100% cut off from the kitchen.
Step 2: Clear Working Area
Clear the entire kitchen appliance around the kitchen tap. In other words, prepare the working area by placing the tool at the right place for easy accessibility.
Step 3: Disconnect From the Main Supply
At this point, you need to disconnect the tap system from the pipe that supplies water. There are two types of water pipe connection, which are:
- The standard pipe
- Flexible pipe
If your tap system uses a standard hose system then you will lose the tap system using the open-ended spanner. Mind you, there will be a splash of water from the pipe once the tap is disconnected. So, keep a rag or towel handy to mop the working area.
But if your tap system uses flexible pipe, then you have to unfasten it using the adjustable pliers to hold the connecting point firm.
Mind you, unfastening or loosening the tap may not be so easy because the nuts might have rusted. So, apply oil or lubricant at the joint before loosening.
Step 4: Remove the Tap
This is the final stage of replacing kitchen tap DIY. You have to start by loosening the nut that keeps the tap attached to the surface.
Ensure you grasp the system firmly to avoid the hose or pipe rotating together. The idea is to remove it from the stud, so you can detach the tap.
After detaching the tap, make sure you clean all the joints and lubricate the rusty parts.
Voila, you have successfully removed your spoilt tap. That is your first stage on how to change a kitchen tap
Click Here to Check Kitchen Tap on Amazon
How to Fit a Kitchen Tap
The reality is that if you have gone through the rigorous steps of removing your tap, then fitting your kitchen tap will not be a big deal.
In summary, you can fit your change your kitchen tap by reversing the steps listed above.
However, let’s go step by step on how to get that done.
Step 1:
Ensure that you clean the surface where you will mount the new tap. In other words, clean the surface from which you removed the old tap
Step 2:
Fit the new tap to the outer surface then reconnect to the main water supply. Make sure you mask the joint with the masking tape to avoid leakage.
With these steps, you have come to an end to the processes that lead to the correct change of kitchen Tap.
How to change a kitchen tap – FAQ
Is it easy to change a kitchen tap?
Yes, it is easy to change a kitchen tap, but that is only when you have the right tools and information.
When you follow the instructions above, you will definitely change your kitchen tap easily
Can you change taps yourself?
It depends on the tap you are referring to. In this article, we talked about changing a kitchen tap. However, you can change any type of tap yourself once you have the time to learn how to do it.
How do you change a Kitchen sink tap?
I guess you are referring to the kitchen faucet. Just follow the instructions above, you will be fine. However, you can get more detail from the user manual that came with your purchase. In case you don’t have it, watch the video here
What tools do I need to change a tap?
If your question is about how to change a kitchen tap, then the tools listed above are all you need to get it done
How to change a kitchen tap – conclusion
The kitchen is the engine room of every house. So, it needs to be in order at any given time. This means that you must ensure that all kitchen facilities are working accordingly.
Fixing a kitchen is usually expensive, but with little effort from your side, you can fix some things yourself
With this article on how to change a kitchen tap, you can save money today.
Also Read:
- How to clean tiles in the kitchen
- How to remove wren kitchen drawers
- Fix Kitchen, how much does it cost
